Skip to content

IRATA and SPRAT certified rope access teams, working from our Ontario base across Canada.

info@dipenzeintegratedcanada.com

Eight disciplines, delivered from rope

Access is the method, not the service. What matters is the trade work, the inspection and the paperwork that comes back down with the technician.

Full capability index

If what you need is not listed here, it is usually still within reach of a rope team. Ask and we will tell you honestly whether we are the right contractor for it.

Facade and structural repair

Concrete spall and delamination repair, crack injection, patching and parging, brick and masonry repointing, sealant and caulking replacement, expansion joint renewal, glazing gasket and wet seal repair, failed unit replacement, water and leak testing, balcony and parapet repair, anchor and railing re-fixing, emergency make safe.

Envelope maintenance and cleaning

High rise window cleaning, atrium and skylight cleaning, facade and soffit pressure washing, soft washing of precast, brick, metal panel and EIFS, post construction clean down, graffiti and overspray removal, gutter, scupper and downpipe clearing, roof debris removal, bird netting and deterrent systems, scheduled preventative programs.

Height safety systems

Roof anchor and tieback installation, annual load testing and certification, anchor registers and tagging, davit base and sleeve installation, outrigger and monorail assessment, horizontal and vertical lifelines, ladder fall arrest systems, guardrail and edge protection, fall protection surveys and drawings, harness and equipment inspection, logbook management.

Inspection and asset integrity

Close visual inspection, ultrasonic thickness testing, magnetic particle and dye penetrant testing, weld and coating surveys, corrosion mapping and trending, drone and remote visual survey, thermal imaging, tank, stack, silo and chimney surveys, bridge and gantry inspection, tower and mast inspection, lifting equipment examination, condition reports and defect schedules.

Coatings and fabric maintenance

Abrasive, sponge and hydro blasting, needle gunning and power tool preparation, epoxy, polyurethane and zinc rich coating systems, elastomeric and architectural painting, film thickness recording, thermal and acoustic insulation, pipe and vessel lagging, cladding and sheeting replacement, flashing and roof repairs, fireproofing and intumescent reinstatement.

Mechanical, welding and fabrication

Structural and plate welding at height, hot work permits and fire watch, steel fabrication and erection, platform, walkway and handrail installation, controlled bolting, torquing and tensioning, flange management, pipe support and small bore replacement, valve and actuator changes, rigging and lift planning, decommissioning and controlled removals.

Confined space and rescue

Confined space entry teams and attendants, standby rescue cover for third party trades, pre entry and continuous gas testing, ventilation and purging, tank and vessel internal cleaning, sludge and residue removal, liner and coating inspection, space specific rescue plans, live rescue drills, shutdown and turnaround crews.

Training, consultancy and support

Working at height awareness, harness and fall protection training, rescue planning and live drills, method statement and permit development, access strategy consultancy, design stage anchor and roof review, site supervision and management, skilled manpower supply, specialist access equipment arrangement, certification pathway guidance.

Tell us about the elevation.

Photographs, drawings or an engineer's report are enough to start. We come back with the access method, the scope and a schedule.