Building envelope maintenance
Cleaning and preventative programs that keep a tower looking and performing the way the reserve fund study assumed it would, year after year.
Programs and one off work
Most clients start with a single clean and move to a scheduled program once they see the condition record that comes back with it.
High rise window cleaning
Interior and exterior glass on rope, including spandrel panels, atria, skylights and the setbacks a platform cannot reach.
Facade and soffit washing
Pressure and soft washing of precast, brick, metal panel and EIFS, with detergent selection matched to the substrate.
Post construction clean down
Construction film, mortar smear, overspray and label removal before handover, with a deficiency photo set for the builder.
Drains, gutters and roofs
Scupper, downpipe and gutter clearing, roof debris removal and drain checks before the freeze and after the thaw.
Bird and pest deterrent
Netting, spike and wire systems on ledges, balconies and mechanical screens, with nesting clean up and sanitising.
Scheduled maintenance programs
Annual or semi annual cycles priced for the year, with a written condition record each visit so defects are caught early.
What a program visit leaves behind
Cleaning puts a trained set of eyes on every square metre of the envelope. That is the part most owners undervalue, so we write it down.
Photographic condition record
Dated images of every elevation, filed so you can compare this year against last year rather than rely on memory.
Defect schedule
Failed sealant, cracked units, spalling and corrosion listed by elevation and floor, ranked by urgency, ready for your engineer.
Anchor condition note
We are on your anchors anyway, so you get a note on their condition and when their certification is next due.