Skip to content

IRATA and SPRAT certified rope access teams, working from our Ontario base across Canada.

info@dipenzeintegratedcanada.com

The work we take on

Access work is usually done under confidentiality, so named case studies are published only with the client's written permission. What follows is the shape of a typical programme. Specific references are provided with every proposal.

Representative scopes

Each of these describes how a programme of that type is normally planned and delivered, so you can judge whether we are the right contractor before you spend time on a tender.

Condominium sealant and balcony programme

A multi storey tower with failed perimeter sealant and spalling at the slab edges. The programme starts with a full photographic survey from rope, which usually revises the consultant's quantities in both directions. Work then runs elevation by elevation, outside peak hours, with balcony access scheduled by floor and notices issued by the property manager. Closeout is a marked up elevation drawing showing every joint replaced and every patch placed.

Commercial tower envelope maintenance contract

An annual or semi annual cycle covering glass, spandrel, soffits and atrium, priced for the year so there is no variation every time a floor needs attention. Each visit produces a dated condition record and a defect schedule, which is what turns a cleaning contract into early warning for the building's capital plan.

Roof anchor survey and recertification

A building where nobody can produce a current anchor certificate, which quietly stops every contractor who needs to work on the facade. The scope is a full survey of the roof, load testing of what is there, replacement of what fails, and a numbered, tagged register that any future contractor can be handed on day one.

Emergency make safe after an engineer's order

Loose cladding or spalling concrete over a public sidewalk, where the immediate requirement is to remove the hazard and reopen the ground. A rope team can be on the elevation the same day, take down what is loose, and hand back a photographic record of what was removed and what still needs permanent repair.

Storage tank inspection and coating repair

External shell and roof inspection with thickness readings at a fixed grid, followed by localised blasting and coating repair at the locations that reading found. Because the same crew carries both capabilities, the asset owner pays for one mobilisation rather than an inspection followed months later by a contractor.

Shutdown support with standby rescue

A plant turnaround where several trades need access at height and inside vessels within a fixed window. We provide the access, the confined space entry teams and the standby rescue cover for everyone on site, then demobilise cleanly when the plant restarts.


The work, up close

Rope access, envelope repair, inspection and industrial work at height. Click any frame to open it full size.


The record you get back

Every facade programme is photographed from the same positions at the start and at handover, so the board can see exactly what changed. Drag the handle, or use the arrow keys.

After
Before
Before After
‹›
Placeholder pair, shown to demonstrate the panel. Replace with a matched before and after from a completed elevation before launch.

Tell us about the elevation.

Photographs, drawings or an engineer's report are enough to start. We come back with the access method, the scope and a schedule.